Bolid Signal-10 Bedienungsanleitung PDF herunterladen (Seite 10)

Orion ISS

www.bolid.com 10

¾ Indicators (LEDs)

READY LED to indicate device condition and 10 status

indicators to indicate statuses of the device alarm loops

¾ Internal Sounder

Built-in

¾ Tamper Switch

Built-in

¾ Event Log Capacity

512 events

¾ RS-485 Communication Port

Data Transmission

Transmission Rate

Yes

Half-duplex

9600 Bd

¾ Power Supply

External 12 to 24 V DC.

Bolid manufactured RIP-12 or RIP-24 battery backed

power supplies are advisable

¾ Input Voltage

Rated Voltage

Shutdown Voltage

Two inputs (main and backup)

10.2 V ÷ 28.4 V DC

9 V DC

¾ Input Current

220 – 410 mА at 12 V supply voltage,

110 – 200 mА at 24 V supply voltage

¾ Pre-Operation Time

3 s maximum provided that at least 11 V steady voltage is

applied to one of power inputs

¾ External ID Reader

Output Interface

Reader LEDs

One Reader Input to connect an external reader of ID such

as Dallas Touch Memory devices (iButtons) and so on

Touch Memory (1-Wire, µ-LAN)

Two LEDs (Red + Green) controlled by logical

+5 V CMOS levels, with current values being restricted by

10 mA at direct connection

¾ ID Memory Capacity

Up to 85 ID codes

The input power voltage is commuted also to the device outputs SIR and LAM to provide power to ex-

ternal sound and light alarms. If the outputs are loaded close to maximum values, it is advisable to power

the Signal-10 device from 24 V power supplies

More precise values can be found at the Annex to this document, see page 93 of this Manual

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 95 96

Kommentare zu diesen Handbüchern

Keine Kommentare

Bolid Signal-10 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern